Nissan Sentra manuals

Nissan Sentra Service Manual: Dtc/circuit diagnosis

How to erase permanent  DTC
Description OUTLINE When a DTC is stored in ECM When a DTC is stored in ECM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the ...

Trouble diagnosis - specification value
Description The specification (SP) value indicates the tolerance of the value that is displayed in “SPEC” of “DATA MONITOR” mode of CONSULT during normal operation of the Engin ...

Other materials:

Multiport fuel injection system
MULTIPORT FUEL INJECTION SYSTEM : System Description SYSTEM DIAGRAM *1: ECM determines the start signal status by the signals of engine speed and battery voltage. *2: M/T models *3: CVT models *4: This sensor is not used to control the engine system under normal conditions. SYSTEM DES ...

How to set srt code
Description OUTLINE In order to set all SRTs, the self-diagnoses as in the “SRT ITEM” table must have been performed at least once. Each diagnosis may require actual driving for a long period of time under various conditions. SRT ITEM The table below shows required self-diagnostic ...

Component parts
Component parts location Generator IPDM E/R (view with air inlet duct removed) ECM Battery current sensor Charge warning lamp indicator Component description Component part Description Generator (IC regulator) The IC regulator controls the power generation ...

© 2014-2026 Copyright b17.nisentra.com