Nissan Sentra Service Manual: Removal and installation

Wheel alignment

Inspection PRELIMINARY INSPECTION WARNING: Always adjust the wheel alignment with the vehicle on a flat surface. NOTE: If the wheel alignment is out of specification, inspect and replace any d ...

Front coil spring and strut

Exploded View Piston rod lock nut Strut mount insulator Strut mount bearing Bound bumper Coil spring Lower rubber seat Strut Steering knuckle Front Removal and Installation ...

Other materials:

Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injur ...

Continuously Variable Transmission (CVT) (if so equipped)
The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift lever is moved to the P (Park) position. When moving the ignition switch to the LOCK position, make sure the shift lever is in the P (Park) position. When removing the key ...

C1708, C1709, C1710, C1711 Transmitter (no data)
DTC Logic NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS transmitter IDs Display tire pressure reported by the TPMS transmitter Read TPMS DTCs Registe ...