Nissan Sentra Owners Manual: Tire equipment

Nissan Sentra Owners Manual / Starting and driving / Cold weather driving / Tire equipment

SUMMER tires have a tread designed to provide superior performance on dry pavement.
However, the performance of these tires will be substantially reduced in snowy and icy conditions. If you operate your vehicle on snowy or icy roads, NISSAN recommends the use of MUD & SNOW or ALL SEASON TIRES on all four wheels. Please consult a NISSAN dealer for the tire type, size, speed rating and availability information.
For additional traction on icy roads, studded tires may be used. However, some U.S.
states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires.

Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires.

Tire chains may be used. For details see “Tire chains” in the “Maintenance and do-ityourself” section of this manual.

Draining of coolant water

If the vehicle is to be left outside without antifreeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For details, see “Changing engine coolant” ...

Special winter equipment

It is recommended that the following items be carried in the vehicle during winter: A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades. A sturdy, fl ...

Other materials:

System
System Diagram FRONT POWER WINDOW LH ANTI-PINCH SYSTEM System Description MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH INPUT/OUTPUT SIGNAL CHART Item Input signal to main power window and door lock/unlock switch Main power window and door lock/unlock switch function A ...

Output speed sensor
Exploded View Transaxle assembly Output speed sensor O-ring : Vehicle front : Always replace after every disassembly. : NВ·m (kg-m, in-lb) : Genuine NISSAN CVT Fluid NS-3 Removal and Installation REMOVAL Disconnect the output speed sensor harness connector. Remove ...

Fuel pressure
Work Procedure FUEL PRESSURE RELEASE 1.FUEL PRESSURE RELEASE With CONSULT Turn ignition switch ON. Perform вЂњFUEL PRESSURE RELEASEвЂќ in вЂњWORK SUPPORTвЂќ mode of вЂњENGINEвЂќ using CONSULT Start engine. After engine stalls, crank it two or three times to release ...