Nissan Sentra manuals

Nissan Sentra Service Manual: Removal and installation

Normal operating condition
Description Front wiper motor protection function Ipdm e/r may stop the front wiper to protect the front wiper motor if any obstruction (operation resistance) such as a large amount of snow ...

Washer tank
Exploded view Washer tank inlet Washer tank Washer level switch Washer tank seal Washer pump Removal and installation REMOVAL Drain the washer fluid. Remove the front under ...

Other materials:

SRS Air bag warning lamp does not turn OFF
Diagnosis Procedure 1.CHECK AIR BAG MODULE AND SEAT BELT PRE-TENSIONER Check the deployment of air bag module. Is air bag module deployed? YES >> Replace the malfunctioning parts. NO >> GO TO 2. 2.CHECK AIR BAG FUSE Check 10 A fuse [No.3, located in fuse block (J/B)]. Is th ...

VDC/TCS/ABS
Symptom Table If ABS warning lamp and SLIP indicator lamp turn ON, perform self-diagnosis. NOTE: 1: The ABS does not operate when the speed is 10 km/h (6 MPH) or less. 2: Under the following conditions, ABS is activated and vibration is felt when brake pedal is lightly depr ...

B142A Ignition voltage
Description DTC B142A IGNITION VOLTAGE Ignition voltage is supplied to the air bag diagnosis sensor unit when the ignition is in the ON position. The air bag diagnosis sensor unit will monitor for low or high ignition voltage. PART LOCATION Refer to SRC-5, "Component Parts Location" ...

В© 2014-2026 Copyright b17.nisentra.com