Nissan Sentra manuals

Nissan Sentra Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Commercial Service Tool


Commercial Service Tool

System description


Precaution for Liquid Gasket
Removal of liquid gasket After removing the bolts and nuts, separate the mating surface and remove the old liquid gasket using tool. Tool number : kv10111100 (j-37228) Caution: Do not damag ...

System description
DESCRIPTION Engine Cooling System Schematic CVT Models Radiator Water inlet Reservoir tank Thermostat Engine oil cooler Thermostat housing Water pump Cylinder head Cylinder b ...

Other materials:

Sport mode control
SPORT MODE CONTROL : System Description SYSTEM DIAGRAM SYSTEM DESCRIPTION SPORT mode that keeps high engine revolution and provides direct feel and acceleration performance suitable for driving on winding road. ECM receives an SPORT mode signal from TCM via CAN communication and ...

Keyfob (if so equipped)
Replace the battery in the keyfob as follows: Remove the screw A . Insert a small screwdriver into the slit of the corner B and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. Replace the battery with a new one. Do not touch the int ...

P0456 EVAP Control system
DTC Logic DTC DETECTION LOGIC This diagnosis detects leaks in the EVAP line between fuel tank and EVAP canister purge volume control solenoid valve, using the negative pressure caused by decrease of fuel temperature in the fuel tank after turning ignition switch OFF. If ECM judges there a ...

В© 2014-2026 Copyright b17.nisentra.com