Nissan Sentra Service Manual: Dtc/circuit diagnosis
Sport mode switch
Component function check
1. Check sport mode switch operation
- Turn ignition switch on.
- Check sport mode indicator lamp turns on/off on combination meter when turn sport mode switch on/off.
Is the inspection result normal? Yes >> inspection end.
No >> proceed to dms-71, "diagnosis procedure".
Diagnosis procedure
Regarding wiring diagram information, refer to dms-65, "wiring diagram".
1.Detect malfunctioning items
What is malfunction items? Sport mode switch illumination does not turns on>>go to 2.
Sport mode indicator lamp does not turns on>>go to 8.
2.Check sport mode switch illumination power supply (1)
- Turn off the headlamp.
- Turn ignition switch off.
- Disconnect sport mode switch harness connector.
- Turn ignition switch on.
- Turn ON the headlamp
- Check the voltage between sport mode switch harness connector terminals.
Is the inspection result normal? Yes >> go to 3.
No >> go to 4.
3.Check intermittent incidente
Refer to gi-39, "intermittent incident".
Is the inspection result normal? Yes >> replace sport mode switch. Refer to dms-76, "removal and installation".
No >> replace the fuse after repair the applicable circuit.
4.Check sport mode switch illumination power supply (2)
Check the voltage between sport mode switch harness connector and ground.
Is the inspection result normal? Yes >> go to 7.
No >> go to 5.
5.Check fuse
- Turn off the headlamp.
- Turn ignition switch OFF.
- Pull out #37 fuse. Refer to pg-47, "terminal arrangement".
- Check that the fuse is not fusing.
Is the inspection result normal? Yes >> go to 6.
No >> replace the fuse after repair the applicable circuit.
6.Check sport mode switch illumination power supply circuit
- Disconnect IPDM E/R harness connector E45. Refer to INL-26, "Wiring Diagram".
- Check the continuity between ipdm e/r harness connector and sport mode switch harness connector.
- Also check harness for short to ground.
Is the inspection result normal? Yes >> perform ipdm e/r auto active test and check tail lamp relay operation. Refer to pcs-9, "diagnosis description" (with intelligent key), pcs-37, "diagnosis description" (without intelligent key).
No >> repair or replace error-detected parts.
7.Check ground circuit
- Turn off the headlamp.
- Turn ignition switch OFF
- Check continuity between sport mode switch harness connector terminal and ground.
Is the inspection result normal? Yes >> check intermittent incident. Refer to gi-39, "intermittent incident".
No >> repair or replace error-detected parts.
8.Check sport mode switch circuit
- Turn ignition switch OFF.
- Disconnect sport mode switch harness connector.
- Turn ignition switch ON.
- Check voltage between sport mode switch harness connector terminals.
Is the inspection result normal? Yes >> go to 13.
No >> go to 9.
9.Check ground circuit
- Turn ignition switch off.
- Check the continuity between SPORT mode switch harness connector and ground.
Is the inspection result normal? Yes >> go to 10.
No >> repair or replace damaged parts.
10.Check circuit between combination meter and sport mode switch (1)
- Disconnect combination meter harness connector m24.
- Check continuity between combination meter harness connector terminal and sport mode switch harness connector terminal
Is the inspection result normal? Yes >> go to 11.
No >> repair or replace damaged parts.
11.Check circuit between combination meter and sport mode switch (2)
Check continuity between combination meter harness connector terminal and sport mode switch harness connector terminal.
Is the inspection result normal? Yes >> go to 12.
No >> repair or replace damaged parts.
12.Check combination meter input/output signal
- Connect all of disconnected connectors.
- Check input/output signal of combination meter. Refer to mwi-20, "reference value".
Is the inspection result normal? Yes >> check intermittent incident. Refer to gi-39, "intermittent incident".
No >> replace combination meter. Refer to mwi-77, "removal and installation".
13.Check sport mode switch
Check sport mode switch. Refer to dms-37, "component inspection".
Is the inspection result normal?
Yes >> check intermittent incident. Refer to gi-39, "intermittent incident".
No >> replace sport mode switch. Refer to dms-39, "removal and installation".
Component inspection
1.Check sport mode switch
Check continuity between sport mode switch connector terminals.
Is the inspection result normal? Yes >> inspection end
No >> replace sport mode switch. Refer to dms-76, "removal and installation".
Basic inspection
Diagnosis and repair work flow
Work flow
Detailed flow
1.Obtain information about symptom
Interview the customer to obtain as much information as possible about the
conditions and environment un ...
Symptom diagnosis
The sport mode indicator lamp does not turn on
Description
The sport mode indicator lamp does not turn on when the sport mode switch is
operated.
Diagnosis procedure
1.Perform combination meter ...
Other materials:
Strg branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the steering angle sensor for
damage, bend and loose connection
(unit side and connector side).
Is the inspection result ...
Wiper and washer fuse
Description
Diagnosis procedure
1. Check fuses
Check that the following fuses are not blown.
Is the fuse blown?
Yes >> replace the blown fuse after repairing the affected circuit.
No >> inspection end. ...
The door open warning continues displaying, or does not display
Description
The door ajar warning is displayed even though all of the doors are
closed.
The door ajar warning is not displayed even though a door is ajar.
Diagnosis procedure
1.Check bcm input signal
Check the bcm input signal. Refer to dlk-102, "component function check"
( ...
