Nissan Sentra Owners Manual: Receiving a call
When a call is placed to the connected phone, the display will change to phone mode.
To accept the incoming call, either:
- Press the
button on
the steering wheel, or - Touch the green phone icon on the screen.
To reject the incoming call, either:
- Press the
button on the
steering wheel, or - Touch the red phone icon on the screen.
Making a call
To make a call, follow the procedure below:
Press the button on the
control panel.
The “Phone” screen will appear on the display.
Select one of the following options to make a
call ...
During a call
While a call is active, the following options are
available on the screen:
“Handset”
Select this option to switch control of the
phone call over to the handset.
“Mute Mic.”
Select ...
Other materials:
C1708, C1709, C1710, C1711 Transmitter (no data)
DTC Logic
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the TPMS transmitter
Read TPMS DTCs
Registe ...
Interior lights
The interior light can be turned ON regardless
of door position. The light will go off after
a period of time unless the ignition switch is
placed in the ON position when any door is
opened.
The interior lights can be set to operate
when the doors are opened. To turn off the
int ...
Ipdm-e branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the ipdm e/r for damage, bend and
loose connection (unit side
and connector side).
Is the inspection result normal?
Yes ...
