Nissan Sentra Service Manual: DTC/Circuit diagnosis
- U1000 CAN Comm circuit
- U1010 Control unit (CAN)
- B0001, B0002 Driver airbag module
- B0010, B0011 Passenger airbag module
- B0020 Side airbag module LH
- B0021 Side curtain air bag module LH
- B0028 Side airbag module RH
- B0029 Side curtain air bag module RH
- B0091 Front side air bag satellite sensor LH
- B0092 Rear side air bag satellite sensor LH
- B0093 FRont door satellite sensor LH
- B0094 Crash zone sensor
- B0096 Front side air bag satellite sensor RH
- B0097 Rear side air bag satellite sensor RH
- B0098 Front door satellite sensor RH
- B1428 Seat belt buckle switch LH
- B1429 Seat belt buckle switch RH
- B1430, B1432 Seat belt pre-tensioner LH
- B1431, B1433 Seat belt pre-tensioner RH
- B142A Ignition voltage
- B142X Collision detection
- B14XX Air bag diagnosis sensor unit
- B00A0 OCS System
- B00D5 Passenger air bag OFF Indicator
Intermittent incident
Inspection procedure
INTERMITTENT TROUBLE
An intermittent incident may have occurred in the past but is not being
detected currently. This DTC will not be
detected on SELF-DIAG [CURRENT], but may ...
U1000 CAN Comm circuit
Description
CAN (Controller Area Network) is a serial communication system for real time
application. It is an on-vehicle
multiplex communication system with high data communication speed and exc ...
Other materials:
Precaution for supplemental restraint system (srs) "air bag" and "seat belt
pre-tensioner"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system ...
Symptom diagnosis
Combination switch system symptoms
Symptom Table
Perform the data monitor of consult to check for any malfunctioning
item.
Check the malfunction combinations.
Identify the malfunctioning part from the agreed combination and repair
or replace the part.
...
Receiving a call
When a call is placed to the connected phone,
the display will change to phone mode.
To accept the incoming call, either:
Press the button on
the steering
wheel, or
Touch the green phone icon on the screen.
To reject the incoming call, either:
Press the button on the
...
