Nissan Sentra Owners Manual: Vehicle loading information

Nissan Sentra Owners Manual / Technical and consumer information / Vehicle loading information

WARNING

It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Be sure everyone in your vehicle is in a seat and using a seat belt properly.

Installing front license plate

Use the following steps to mount the front license plate: Make holes on the plastic finisher at the location mark (small dimple) using a 0.20 in (5 mm) drill. Apply light pressure to the ...

Terms

It is important to familiarize yourself with the following terms before loading your vehicle: Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and optional eq ...

Other materials:

Power supply and ground circuit
Combination meter COMBINATION METER : Diagnosis Procedure Regarding Wiring Diagram information, refer to MWI-28, "Wiring Diagram". 1.Check fuses Check that the following fuses are not blown. Is the fuse blown? Yes >> replace the blown fuse after repairing the affected circu ...

Automatic anti-glare rearview mirror (if so equipped)
The inside mirror is designed so that it automatically dims according to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is in the ON position. NOTE: Do not hang any objects over the sensors 1 or apply gl ...

P0300, P0301, P0302, P0303, P0304 Misfire
DTC Logic DTC DETECTION LOGIC When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the crankshaft position (CKP) sensor (POS) signal to vary, ECM can determine that a misfire is occurring. Sensor Input signal to ECM ECM function ...