Nissan Sentra manuals

Nissan Sentra Owners Manual: Loading tips

Nissan Sentra Owners Manual / Technical and consumer information / Vehicle loading information / Loading tips

WARNING

  • Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks.

    In a sudden stop or collision, unsecured cargo could cause personal injury.

  • Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs.

    If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury.

  • Overloading not only can shorten the life of your vehicle and the tire, but can also cause unsafe vehicle handling and longer braking distances. This may cause a premature tire failure which could result in a serious accident and personal injury. Failures caused by overloading are not covered by the vehicle’s warranty.
Vehicle load capacity
Do not exceed the load limit of your vehicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as ...

Measurement of weights
Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determ ...

Other materials:

Precaution
Precaution for supplemental restraint system (srs) "air bag" and "seat belt pre-tensioner" The supplemental restraint system such as “air bag” and “seat belt pre-tensioner”, used along with a front seat belt, helps to reduce the risk or severity of injur ...

Precaution
Precaution for supplemental restraint system (SRS) "air bag" and "seat belt pre-tensioner" The supplemental restraint system such as “air bag” and “seat belt pre-tensioner”, used along with a front seat belt, helps to reduce the risk or severity of injur ...

Door mirror remote control switch
Removal and Installation Removal Remove the instrument finisher D. Refer to IP-14, "Exploded View". Using suitable tool (a) release the pawls and remove the door mirror remote control switch (2) from the switch bracket (1). Pawl Installation Installation is in the rev ...

© 2014-2026 Copyright b17.nisentra.com