Nissan Sentra Service Manual: Unit disassembly and assembly

Optical sensor

Removal and installation REMOVAL Remove the defroster grille (LH) using a suitable tool. Disconnect the harness connector from the optical sensor. Release the pawls and remove the optical sen ...

Front combination lamp

Exploded View Large cover (not serviceable) Small cover (not serviceable) Front combination lamp Halogen lamp bulb (high beam) Turn signal lamp bulb Turn signal lamp bulb socket LE ...

Other materials:

Seat belts
The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemental restraint system” section of this manual. ...

P0137 HO2S2
DTC Logic DTC DETECTION LOGIC The heated oxygen sensor 2 has a much longer switching time between rich and lean than the air fuel ratio (A/F) sensor 1. The oxygen storage capacity of the three way catalyst (manifold) causes the longer switching time. To judge the malfunctions of heated oxygen ...

Wheel side
WHEEL SIDE : Removal and Installation REMOVAL Remove the wheel and tire using power tool. Refer to WT-47, "Exploded View". Remove the brake caliper torque member bolts, leaving the brake hose attached. Position the brake caliper aside with wire. Refer to BR-41, "BRAKE C ...