Nissan Sentra Service Manual: Symptom diagnosis

Door switch

Component Function Check 1.Check function Select DOOR LOCK of BCM using CONSULT Select door sw-dr, door sw-as in data monitor mode Check that the function operates normally according to the f ...

Moonroof does not operate properly

Diagnosis Procedure 1. Check bcm power supply and ground circuit Check BCM power supply and ground circuit. Refer to PWC-31, "BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diag ...

Other materials:

C1708, C1709, C1710, C1711 Transmitter (no data)
DTC Logic NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS transmitter IDs Display tire pressure reported by the TPMS transmitter Read TPMS DTCs Registe ...

Can communication
CAN COMMUNICATION : System Description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped ...

P1217 Engine over temperature
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P1217 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX. If DTC P1217 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607. Refer to EC-350, "DTC Logic". If the cooling fan ...