Nissan Sentra Service Manual: Removal and installation

Power window lock switch does not function

Diagnosis Procedure 1.REPLACE POWER WINDOW MAIN SWITCH Replace power window main switch. Confirm the operation after replacement. Is the result normal? YES >> INSPECTION END NO >& ...

Main power window and door lock/ unlock switch

Removal and Installation REMOVAL Release the pawls using a suitable tool and lift the main power window and door lock/unlock switch and finisher as an assembly and remove. Disconnect the h ...

Other materials:

Rear door
Door assembly Door assembly : removal and installation Caution: Use two people when removing or installing the rear door assembly due to its heavy weight. When removing and installing rear door assembly, support rear door with a suitable tool. Removal Remove rear door assembly h ...

Engine oil
Inspection Engine oil level Note: Before starting engine, put vehicle horizontally and check the engine oil level. If engine is already started, stop it and allow 10 minutes before checking. Pull out oil level gauge and wipe it clean. Insert oil level gauge and check that the engine oil ...

P0605 ECM
DTC Logic DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P0605 ECM [Internal control module read only memory (ROM) error] Malfunction in the internal ROM of ECM. ECM DTC CONFIRM ...