Nissan Sentra Service Manual: Ecu diagnosis information

System description

Component parts Component parts location Instrument lower finisher Component description Eco mode switch The ECO mode switch is installed to the instrument lower finisher. When ...

Wiring diagram

Eco mode system Wiring diagram ...

Other materials:

Glass
Use glass cleaner to remove smoke and dust film from the glass surfaces. It is normal for glass to become coated with a film after the vehicle is parked in the hot sun. Glass cleaner and a soft cloth will easily remove this film. CAUTION When cleaning the inside of the windows, do not use sha ...

Front fog lamp
Aiming adjustment PREPARATION BEFORE ADJUSTING The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb. Before performing aiming adjustment procedure, check the following: Ensure all tires are inflated to correct pressure. Place vehicle and screen on level surface. ...

DTC/circuit diagnosis
P1610 LOCK MODE Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC NOTE: If DTC P1610 is displayed with other DTC (for BCM or ...