Nissan Sentra Service Manual: Can system (type 1)

Dtc/circuit diagnosis

Malfunction area chart Main line Branch line Short circuit Main line between ipdm-e and dlc circuit Diagnosis procedure 1.Check connector Turn the ignition switch off. Discon ...

Main line between ipdm-e and dlc circuit

Diagnosis procedure 1.Check connector Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and ...

Other materials:

Rear window defogger relay
Description Power is supplied to the rear window defogger with BCM control. Component Function Check 1. Check rear window defogger relay power supply circuit Turn ignition switch ON. Check that an operation noise of rear window defogger relay (located in IPDM E/R) can be heard when t ...

Dtc/circuit diagnosis
Power supply and ground circuit Diagnosis Procedure Refer to LAN-7, "CAN COMMUNICATION SYSTEM : System Description". Vehicle security indicator Description DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Con ...

Warning lights
Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or ...