Nissan Sentra Service Manual: Instrument lower panel lH
Removal and Installation
REMOVAL
- Remove the instrument side finisher LH (1) using a suitable tool.
- Remove the hood and fuel filler handle assembly from the instrument lower panel LH. Refer to DLK-191, "FUEL FILLER OPENER CABLE : Removal and Installation".
- Release the instrument lower panel LH clips and pawls using a suitable tool.
Metal clip
Pawl
- Disconnect the harness connectors from the instrument lower panel LH and remove.
INSTALLATION
Cluster lid C
Removal and Installation - Cluster Lid C
REMOVAL
Remove cluster lid C lower. Refer to IP-20, "Removal and Installation -
Cluster Lid C Lower".
Remove the cluster lid C screws (A). ...
Glove box assembly
Removal and Installation
REMOVAL
Remove the instrument side finisher RH using a suitable tool.
Remove the glove box assembly upper screws (A).
Remove the glove box assembly lower scre ...
Other materials:
Continuously Variable Transmission (CVT) (if so equipped)
WARNING
Do not depress the accelerator pedal
while shifting from P (Park) or N (Neutral)
to R (Reverse), D (Drive) or L (Low).
Always depress the brake pedal until
shifting is completed. Failure to do so
could cause you to lose control and
have an accident.
Col ...
Wiring diagram
Door mirror
Wiring diagram
Inside mirror
Wiring Diagram
...
Sensor power supply 2 circuit
Description
ECM supplies a voltage of 5.0 V to some of the sensors systematically divided
into 2 groups, respectively.
Accordingly, when a short circuit develops in a sensor power source, a
malfunction may occur simultaneously
in the sensors belonging to the same group as the shorted-circui ...
