Nissan Sentra Service Manual: The oil pressure warning lamp does not turn off
Description
The oil pressure warning lamp remains illuminated while the engine is running (normal oil pressure).
Diagnosis procedure
1.Check combination meter input signal
- Start the engine and select METER/M&A on CONSULT.
- Observe oil w/l data monitor and the operation of the oil pressure warning lamp on the combination meter.
Is the inspection result normal? Yes >> perform ecm self-diagnosis. Refer to ec-66, "consult function".
No >> replace combination meter. Refer to mwi-77, "removal and installation".
The oil pressure warning lamp does not turn on
Description
The oil pressure warning lamp stays off when the ignition switch is turned
on.
Diagnosis procedure
1.Check combination meter oil pressure warning light
Select METER/M&A on CON ...
The door open warning continues displaying, or does not display
Description
The door ajar warning is displayed even though all of the doors are
closed.
The door ajar warning is not displayed even though a door is ajar.
Diagnosis procedure
1.Check bcm ...
Other materials:
Transaxle side
TRANSAXLE SIDE : Removal and Installation
Remove boot after drive shaft is removed from the vehicle.
For drive shaft removal and installation, follow the instructions bellow.
6M/T: Refer to FAX-18, "6M/T : Removal and Installation (LH)".
Except 6M/T: Refer to FAX-26, "EXCEPT ...
P099B Shift solenoid G
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible causes
P099B
SHIFT SOLENOID G
(Shift Solenoid G Control Circuit
Low)
The TCM high clutch & reverse brake solenoid
valve current monitor ...
DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT
A/C AUTO AMP.
A/C AUTO AMP. : Diagnosis Procedure
Regarding Wiring Diagram information, refer to HAC-145, "Wiring Diagram" or
HAC-152, "Wiring Diagram".
1.CHECK FUSE
Check fuses [No. 5, 8 and 21, located in the fuse block (J/B)].
NOTE:
Ref ...
