Nissan Sentra manuals

Nissan Sentra Service Manual: Power generation voltage variable control system

Nissan Sentra Service Manual / Electrical & power control / Charging system / System description / Power generation voltage variable control system

System Diagram

System Description


System Description

Power generation variable voltage control system has been adopted. By varying the voltage to the generator, engine load due to power generation of the generator is reduced and fuel consumption is decreased.

NOTE:

When any malfunction is detected in the power generation variable voltage control system, power generation is performed according to the characteristic of the IC regulator in the generator.

Charging system
System Diagram System Description The generator provides DC voltage to operate the vehicle's electrical system and to keep the battery charged. The voltage output is controlled by the IC ...

Wiring diagram
Charging system Wiring Diagram ...

Other materials:

Refrigerant pressure sensor
Component Function Check 1.CHECK REFRIGERANT PRESSURE SENSOR OVERALL FUNCTION Start engine and warm it up to normal operating temperature. Turn A/C switch and blower fan switch ON. Check the voltage between ECM harness connector terminals. Is the inspection result normal? YES >> ...

Floor trim
Exploded View Floor trim Harness protector Front floor spacer (RH) Front floor spacer (LH) Rear floor spacer (LH) Rear floor spacer (RH) Column hole cover Pawl Front Removal and Installation REMOVAL Remove front seat assemblies. Refer to the following. Refer to S ...

Evaporative emission system
Inspection EVAP CANISTER 1.CHECK EVAP CANISTER Block port (B). Blow air into port (A) and check that it flows freely out of port (C). Release blocked port (B). Apply vacuum pressure to port (B) and check that vacuum pressure exists at the ports (A) and (C). Block port (A) and (B). ...

В© 2014-2026 Copyright b17.nisentra.com