Nissan Sentra manuals

Nissan Sentra Owners Manual: Help voice commands

The following voice commands can be spoken to have the system provide instructions and tips for using the NISSAN Voice Recognition system.

Symptom/error message

Solution

The system responds “Command Not Recognized” or the system fails to recognize the command correctly.
  1. Ensure that the command format is valid. Use the “List Commands” or “What Can I Say?” command under the “Help” menu.
  2. Speak clearly without pausing between words and at a level appropriate to the ambient noise level.
  3. Ensure that the ambient noise level is not excessive (for example, with the windows open or the defroster on).

NOTE:

If it is too noisy to use the phone, it is likely that voice commands will not be recognized.

  1. If optional words of the command have been omitted, then the command should be tried with these in place.
Information voice commands
The following voice commands are available for the information functions of the Navigation System: Traffic Fuel Prices Stocks Movie Listings Current Weather Weather Map 5 — day Fore ...

Troubleshooting guide
The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions ar ...

Other materials:

System initialization
Description If any of the following operations are performed, the initialization is necessary for normal operation of power window system. Disconnection and connection of battery cable from negative terminal. When power window main switch replaced. Electric power supply to power window m ...

B0010, B0011 Passenger airbag module
Description DTC B0010, B0011 PASSENGER AIR BAG MODULE The passenger air bag module is dual stage and is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the passenger air bag module. PART LOCATION Refer to S ...

Dtc/circuit diagnosis
Malfunction area chart Main line Branch line Short circuit Main line between ipdm-e and dlc circuit Diagnosis procedure 1.Check connector Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors fo ...

© 2014-2026 Copyright b17.nisentra.com