Nissan Sentra Service Manual: Dtc/circuit diagnosis

Anti-pinch inspection

Description If any of the following operations are performed, the initialization is necessary for normal operation of antipinch function. Disconnection and connection of battery cable from neg ...

Power supply and ground circuit

BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure Regarding Wiring Diagram information, refer to BCS-51, "Wir ...

Other materials:

Manual transmission (if so equipped)
WARNING Do not downshift abruptly on slippery roads. This may cause a loss of control. Do not over-rev the engine when shifting to a lower gear. This may cause a loss of control or engine damage. Do not shift to the N (Neutral) position while driving. Doing so may ...

Vanity mirror lamp
Removal and installation Caution: Do not attempt to separate the vanity mirror lamp from the sun visor or damage to the components may occur. Note: The vanity mirror lamp is replaced as part of the sun visor. Refer to int-40, "removal and installation". Bulb or lens replacement ...

Dtc/circuit diagnosis
U1000 can comm Description Refer to LAN-7, "CAN COMMUNICATION SYSTEM : System Description". Dtc logic Dtc detection logic Note: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual can diagnostic symptoms and ...