Diagnosis Procedure
1.Check front power window motor (driver side)
Check front power window motor (driver side).
Refer to pwc-43, "driver side : diagnosis procedure".
Is the inspection result normal? Yes >> go to 2.
No >> repair or replace the malfunctioning parts.
2.Replace power window main switch
Is the result normal? Yes >> inspection end
NO >> Check intermittent incident. Refer to GI-39, "Intermittent Incident".
Power windows do not operate with power window main switch
Front passenger side power window does not operateSteering column
Exploded View
Steering column assembly
Slide plates
lower shaft assembly
Removal and Installation
REMOVAL
CAUTION:
While removing the steering column assembly, do not
unlock the tilt lever.
Do not impact on the axis when removing steering
column assembly.
...
Primary speed sensor
Exploded View
Transaxle assembly
O-ring
Primary speed sensor
: Always replace after every
disassembly.
: N m (kg-m, in-lb)
: Genuine NISSAN CVT Fluid NS-3
Removal and Installation
REMOVAL
Disconnect the primary speed sensor connector.
Remove the primary speed sensor.
...
M&a branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the combination meter for damage,
bend and loose connection
(unit side and connector side).
Is the inspection result nor ...