Nissan Sentra Service Manual: B2268 water temp
Description
The engine coolant temperature signal is transmitted from ecm to the combination meter via can communication.
Dtc logic
Dtc detection logic
| Dtc | Consult | Detection condition | Probable malfunction location |
| B2268 | Water temp meter [b2268] | Ecm continuously transmits abnormal engine coolant temperature signals for 60 seconds or more |
|
Diagnosis procedure
1.Perform self-diagnosis of ecm
Perform Self Diagnostic Result of ECM, and repair or replace malfunctioning parts.
>> Refer to EC-66, "CONSULT Function".
B2267 engine speed
Description
The engine speed signal is transmitted from ecm to the combination meter via
can communication.
Dtc logic
Dtc detection logic
Dtc
Consult
Detection condition
Possible ...
Power supply and ground circuit
Combination meter
COMBINATION METER : Diagnosis Procedure
Regarding Wiring Diagram information, refer to MWI-28, "Wiring Diagram".
1.Check fuses
Check that the following fuses are not bl ...
Other materials:
Front disc brake
BRAKE PAD
BRAKE PAD : Exploded View
Cylinder body
Inner shim cover
Inner shim
Inner pad (with pad wear sensor)
Pad retainer
Torque member
Outer pad
Outer shim
Outer shim cover
Molykote AS880N
Molykote 7439
BRAKE PAD : Removal and Installation
REMOVAL
WARNING:
C ...
Precaution
Precautions for Trouble Diagnosis
Caution:
Follow the instructions listed below. Failure to do this may cause
damage to parts:
Never apply 7.0 V or more to the measurement terminal.
Use a tester with open terminal voltage of 7.0 V or less.
Turn the ignition switch off and disconnect the ...
Push starting
CAUTION
Do not push start this vehicle. The
three-way catalyst may be damaged.
Continuously Variable Transmission
(CVT) models and Manual Transmission
(MT) cannot be push-started or towstarted.
Attempting to do so may cause
transmission damage
For manual transmission (MT) models,
...
