Nissan Sentra Owners Manual: Three-way catalyst

Nissan Sentra Owners Manual / Starting and driving / Precautions when starting and driving / Three-way catalyst

The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants.

WARNING

The exhaust gas and the exhaust system are very hot. Keep people, animals or flammable materials away from the exhaust system components.
Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire.

CAUTION

Do not use leaded gasoline. Deposits from leaded gasoline will seriously reduce the three-way catalyst’s ability to help reduce exhaust pollutants.
Keep your engine tuned up. Malfunctions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do not keep driving if the engine misfires, or if noticeable loss of performance or other unusual operating conditions are detected. Have the vehicle inspected promptly by a NISSAN dealer.
Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire, damaging the three-way catalyst.
Do not race the engine while warming it up.
Do not push or tow your vehicle to start the engine.

Exhaust gas (carbon monoxide)

WARNINGDo not breathe exhaust gases; they contain colorless and odorless carbon monoxide. Carbon monoxide is dangerous. It can cause unconsciousness or death. If you suspe ...

Tire Pressure Monitoring System (TPMS)

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire infl ...

Other materials:

Diagnosis system (BCM)
Common item COMMON ITEM : CONSULT Function (BCM - COMMON ITEM) Application item Consult performs the following functions via can communication with bcm. System application BCM can perform the following functions. Door lock Door lock : consult function (bcm - door lock) Data monitor ...

Rear suspension beam
Exploded View Rear suspension beam Rear suspension arm bracket Front Removal and Installation NOTE: When removing components such as hoses, tubes, lines, etc., cap or plug openings to prevent fluid from spilling. REMOVAL Remove the rear wheels and tires using power tool. Ref ...

Removal and installation
A/C SWITCH ASSEMBLY Removal and Installation REMOVAL Remove the CVT shift selector finisher (CVT: RE0F11A). Refer to TM-253, "Removal and Installation". Remove the MT shift selector finisher (6MT: RS6F94R). Refer to TM-22, "Removal and Installation". Remove the A/ ...