Nissan Sentra Service Manual: Service data and specifications (SDS)

Removal and installation

ACCELERATOR CONTROL SYSTEM Exploded View Accelerator pedal assembly Brake pedal bracket Locating hook Locating pin Removal and Installation REMOVAL Remove instrument lower p ...

Transmission & driveline

...

Other materials:

Slip indicator lamp
Component Function Check 1.CHECK SLIP INDICATOR LAMP FUNCTION Check that slip indicator lamp in combination meter turns ON for approximately 2 seconds after ignition switch is turned ON. Is the inspection result normal? YES >> Inspection End. NO >> Proceed to diagnosis proce ...

Ecm branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the ecm for damage, bend and loose connection (unit side and connector side). Is the inspection result normal? YES > ...

Wiper blade
Wiper blade WIPER BLADE : Removal and Installation REMOVAL Put the wiper arms in the service position. Turn the ignition switch ON and then OFF. Within 1 minute, activate washer switch 2 times in less than 0.5 seconds to put the wiper arms in the service position. Lift the w ...