Nissan Sentra Service Manual: Preparation

Precautions in repairing high strength steel

High strength steel (HSS) High strength steel is used for body panels in order to reduce vehicle weight. Accordingly, precautions in repairing automotive bodies made of high strength steel are ...

Repairing material

Foam Repair During factory assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foam i ...

Other materials:

Folding rear seat
Pull the knob A to fold each seatback down. WARNING Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in serious injury in an accident or s ...

Side window glass
Components Side window glass Spacer Headlining Rear body pillar Rear pillar finisher Rear door weatherstrip Primer area Adhesive 7 mm (0.3 in) 12 mm (0.5 in) Removal and Installation REMOVAL Remove the rear pillar finisher. Refer to INT-29, "REAR PILLAR FIN ...

Front door glass
Removal and Installation REMOVAL WARNING: Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least three minutes. Do not use air tools or electric tools for servicing. NOTE: LH front door panel shown; RH side similar Disconnect the battery ...