Nissan Sentra Owners Manual: Outside temperature display
The outside temperature function provides a display of the outside temperature when the ignition switch is placed in the ON position.
The display of positive temperatures is unsigned (blank), negative temperatures are prefixed with a minus sign.
Trip computer
When the ignition switch is placed in the ON
position, the modes of the trip
computer can be
selected by pressing the button on the
steering wheel. The following modes can be selected:
Trip ...
Compass display (if so equipped)
This unit measures terrestrial magnetism and indicates
heading direction of vehicle.
With the ignition switch in the ON position, press
the button as described in the
chart below
to activate ...
Other materials:
Symptom diagnosis
HEATER AND AIR CONDITIONING SYSTEM
CONTROL SYMPTOMS
Symptom Table
INSUFFICIENT COOLING
Component Function Check
Symptom: insufficient cooling
Inspection flow
1. Confirm symptom by performing operation check - temperature decrease
Press the a/c switch.
Turn temperature control dial c ...
Removal and installation
Combination meter
Exploded view
Combination meter
Front cover
Removal and installation
Removal
Remove cluster lid a. Refer to ip-19, "removal and installation".
Remove the screws from the combination meter.
Remove the combination meter.
Disconnect the comb ...
Changing engine oil
Park the vehicle on a level surface and apply
the parking brake.
Start the engine and let it idle until it reaches
operating temperature, then turn it off.
Remove the oil filler cap A by turning it
counterclockwise.
Place a large drain pan under the drain plug
B .
Remove the d ...
