Nissan Sentra Owners Manual: Operating tips

Nissan Sentra Owners Manual / Monitor, climate, audio, phone and voice recognition systems / RearView Monitor (if so equipped) / Operating tips

CAUTION

Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth dampened with a diluted mild cleaning agent and then wipe with a dry cloth.
Do not damage the camera as the monitor screen may be adversely affected.

When the shift lever is shifted to R (Reverse), the monitor screen automatically changes to the RearView Monitor mode.

However, the radio can be heard.
It may take some time until the RearView Monitor is displayed after the shift lever has been shifted to R (Reverse). Objects may be distorted momentarily until the RearView Monitor screen is displayed completely.

When the shift lever is returned to a position other than R (Reverse), it may take some time until the screen changes. Objects on the screen may be distorted until they are completely displayed.
When the temperature is extremely high or low, the screen may not clearly display objects.
This is not a malfunction.
When strong light directly enters the camera, objects may not be displayed clearly.
Vertical lines may be seen in objects on the screen. This is due to strong reflected light from the bumper. This is not a malfunction.
The screen may flicker under fluorescent light. This is not a malfunction.
The colors of objects on the RearView Monitor may differ somewhat from those of the actual object
When the contrast of objects is low at night, pressing the SETTING button or [
] button may not change the brightness.
Objects on the monitor may not be clear in a dark place or at night.
If dirt, rain or snow attaches to the camera, the RearView Monitor may not display objects.
Clean the camera.
Do not use body wax on the camera window.
If body wax does get on the camera window, wipe off the wax with a clean cloth dampened with mild detergent diluted with water.

Adjusting the screen

Without Navigation System The procedure for adjusting the quality of the screen differs depending on the type of screen present on the vehicle. For vehicles without Navigation System: Pr ...

Vents

Adjust air flow direction by moving the vent slides. Open or close the vents by using the dial. Move the dial toward the to open the vents or toward the to close them. ...

Other materials:

Unit removal and installation
Front suspension member Exploded View Upper link Front suspension member Member stay Front Upper link Front suspension member Member stay Front Removal and Installation REMOVAL Remove the front wheel and tire using power tool. Refer to WT-47, "Explode ...

System description
System Can communication system Can communication system : system description CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Man ...

NISSAN Intelligent Key® (if so equipped)
Replace the battery in the Intelligent Key as follows: Remove the mechanical key from the Intelligent Key. Insert a small screwdriver A into the slit B of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. Replace the battery wi ...