Nissan Sentra manuals

Nissan Sentra Owners Manual: Voice Adaptation (VA) mode

Voice Adaptation allows up to two out-of-dialect users to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each connected phone.

Training procedure

The procedure for training a voice is as follows.

  1. Position the vehicle in a reasonably quiet outdoor location.
  2. Sit in the driver’s seat with the engine running, the parking brake on, and the transmission in P (Park).
  3. Press and hold the for morebutton
    for more than 5 seconds.
  4. The system announces: “Press the PHONE/SEND ( hands-free phone system to enter the voice ) button for the
    hands-free phone system to enter the voice adaptation mode or press the PHONE/END ( different language.� ) button to select a
    different language.�
  5. Press the button.


    For information on selecting a different language, see “Choosing a language� in this section.

  6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions provided by the system.
  7. When preparation is complete and you are ready to begin, press the button.
    button.
  8. The VA mode will be explained. Follow the instructions provided by the system.
  9. When training is finished, the system will tell you an adequate number of phrases have been recorded.
  10. The system will announce that voice adaptation has been completed and the system is ready.

The VA mode will stop if:

Training phrases

During the VA mode, the system instructs the trainer to say the following phrases. (The system will prompt you for each phrase.)

List of voice commands
Main Menu “Callâ€� “Phonebookâ€� “Recent Callsâ€� “Connect Phoneâ€� When you press and release the  button on the steering wheel, you can choose from the commands on the Main Men ...

Manual control
While using the voice recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice commands. This can be especially helpful if the noise ...

Other materials:

AV branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch off Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the av control unit for damage, bend and loose connection (unit side and connector side). Is the inspection result normal ...

Vanity mirror lamp
Removal and installation Caution: Do not attempt to separate the vanity mirror lamp from the sun visor or damage to the components may occur. Note: The vanity mirror lamp is replaced as part of the sun visor. Refer to int-40, "removal and installation". Bulb or lens replacement ...

Steering column
Exploded View Steering column assembly Slide plates lower shaft assembly Removal and Installation REMOVAL CAUTION: While removing the steering column assembly, do not unlock the tilt lever. Do not impact on the axis when removing steering column assembly. ...

© 2014-2026 Copyright b17.nisentra.com