Nissan Sentra Service Manual: Rear window defogger and door mirror defoggers do not operate
Diagnosis procedure
Regarding Wiring Diagram information, refer to DEF-20, "Wiring Diagram".
1. Check rear window defogger switch
Check rear window defogger switch.
Refer to def-30, "component function check".
Is the inspection result normal? Yes >> go to 2.
No >> repair or replace the malfunctioning parts.
2. Check rear window defogger relay
Check rear window defogger relay.
Refer to def-32, "component function check".
Is the inspection result normal? Yes >> go to 3 .
No >> repair or replace the malfunctioning parts.
3. Check rear window defogger power supply and ground circuit
Check rear window defogger power supply and ground circuit.
Refer to def-33, "component function check".
Is the inspection result normal? Yes >> check intermittent incident. Refer to gi-39, "intermittent incident".
No >> repair or replace the malfunctioning parts.
Defogger system symptoms
Symptom table
*: if equipped ...
Rear window defogger does not operate but both door mirror defoggers operate
Diagnosis procedure
1. Check rear window defogger power supply and ground circuit
Check rear window defogger power supply and ground circuit.
Refer to DEF-32, "Component Function Check" ...
Other materials:
Normal operating condition
Compass
Compass : description
Compass
The electronic compass is highly protected from changes in most magnetic
fields. However, some large
changes in magnetic fields can affect it. Some examples are (but not limited
to): high tension power lines,
large steel buildings, subways, steel ...
Strg branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the steering angle sensor for
damage, bend and loose connection
(unit side and connector side).
Is the inspection result ...
System description
Component parts
Component parts location
Instrument lower finisher
Eco mode switch
The eco mode switch is installed to the instrument lower finisher.
When the ECO mode indicator lamp on the combination meter is
OFF and the ECO mode switch is pressed, the ECO mode is
active and ...
