Nissan Sentra manuals

Nissan Sentra Owners Manual: Parking/parking on hills


WARNING

  • Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire.

  • Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) for CVT models or in an appropriate gear for manual transmission models. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in an accident. Make sure the shift lever has been pushed as far forward as it can go and cannot be moved without depressing the foot brake pedal.

  • Never leave the engine running while the vehicle is unattended.

  • Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents.

  1. Firmly apply the parking brake.
  2. Manual transmission models:

Place the shift lever in the R (Reverse) position.

When parking on an uphill grade, place the shift lever in 1st gear.

Continuously Variable Transmission (CVT) models: Move the shift lever into the P (Park) position.

  1. To help prevent the vehicle from rolling into traffic when parked on an incline, it is a good practice to turn the wheels as illustrated.
  1. Place the ignition switch in the LOCK position and remove the key.
Increasing fuel economy
Keep your engine tuned up. Follow the recommended scheduled maintenance. Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy. ...

Power steering
WARNING If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. When the power stee ...

Other materials:

Power window motor
DRIVER SIDE DRIVER SIDE : Description Door glass moves up/down by receiving the signal from main power window and door lock/unlock switch DRIVER SIDE : Component Function Check 1. Check front power window motor lh circuit Check front power window motor lh operation with the main power window ...

P1588 G Sensor
DTC Logic DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition Possible causes P1588 G Sensor (Gravity Sensor Circuit) When the following diagnosis conditions are satisfied and the detection conditi ...

Precautions for Suspension
When installing rubber bushings, the final tightening must be carried out under unladen conditions with tires on ground. Spilled oil might shorten the life of rubber bushings. Be sure to wipe off any spilled oil Unladen conditions mean that fuel, engine coolant and lubricant are full. ...

В© 2014-2026 Copyright b17.nisentra.com