Nissan Sentra manuals

Nissan Sentra Service Manual: Ecu diagnosis information

Bcm (body control module)

List of ecu reference

Moonroof motor assembly


Moonroof motor assembly

Reference value

Terminal layout

Physical values


Physical values

Wiring diagram


Diagnosis system (BCM)
Common item Common item : consult function (bcm - common item) Application item Consult performs the following functions via can communication with bcm. Direct diagnostic mode Descriptio ...

Wiring diagram
Moonroof system Wiring Diagram ...

Other materials:

General Precautions
Always use a 12 volt battery as power source. Do not attempt to disconnect battery cables while engine is running. Before connecting or disconnecting the ECM harness connector, turn ignition switch OFF and disconnect negative battery cable. Failure to do so may damage the ECM because ...

Throttle valve closed position learning
Description Throttle Valve Closed Position Learning is a function of ECM to learn the fully closed position of the throttle valve by monitoring the throttle position sensor output signal. It must be performed each time the harness connector of the electric throttle control actuator or ECM is ...

Push-button ignition switch illumination circuit
Description Provides the power supply and the ground to control the push-button ignition switch illumination. Component function check 1.Check push-button ignition switch illumination operation Consult active test Turn the ignition switch ON. Select engine sw illumi of bcm (intelligen ...

В© 2014-2026 Copyright b17.nisentra.com