Nissan Sentra Service Manual: Both doors mirror defogger don’t operate but rear window defogger operates
Diagnosis procedure
Regarding Wiring Diagram information, refer to DEF-20, "Wiring Diagram".
1. Check door mirror defogger fuse
Check if the following fuse in fuse block (J/B) is blown.
Is the inspection result normal? Yes >> go to 2.
No >> replace the blown fuse after repairing the affected circuit.
2. Check door mirror defogger power supply circuit
Check door mirror defogger power supply and ground circuit.
Refer to def-35, "component function check" (driver side) or def-37, "component function check" (passenger side).
Is the inspection result normal? Yes >> go to 3.
No >> repair or replace the malfunctioning parts.
3. Check both door mirror defogger
- Check door mirror lh. Refer to def-36, "component inspection".
- Check door mirror RH. Refer to DEF-38, "Component Inspection".
Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-39, "Intermittent Incident".
NO >> Repair or replace the malfunctioning parts.
Rear window defogger does not operate but both door mirror defoggers operate
Diagnosis procedure
1. Check rear window defogger power supply and ground circuit
Check rear window defogger power supply and ground circuit.
Refer to DEF-32, "Component Function Check" ...
Driver side door mirror defogger does not operate
Diagnosis procedure
1. Check door mirror defogger lh
Check door mirror defogger LH.
Refer to DEF-35, "Component Function Check".
Is the inspection result normal?
YES >> Refer ...
Other materials:
Rear window defogger switch
Description
The rear window defogger is operated by pressing the rear window
defogger switch ON.
The indicator lamp in the rear window defogger switch illuminates while
the rear window defogger is on.
Component function check
1. Check rear window defogger switch function
Check (Ð ...
Clutch pedal
Exploded View
Clutch pedal
Stopper rubber
Clip
Clutch interlock switch (if equipped)
Clutch pedal position switch (if equipped)
Pedal pad
Pedal stopper rubber
Removal and Installation
REMOVAL
Remove instrument lower panel LH. Refer to IP-21, "Removal and
Installa ...
Abs branch line circuit
Diagnosis Procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the abs actuator and electric unit
(control unit) for damage, bend
and loose connection (unit side and connector side).
...
